JVC KY-F70B manual Saving images from the memory to an MO/Zip disk, E38, Buffer is Full

4. Basic operations (continued)

Saving images from the memory to an MO/Zip® disk

It is possible to transfer images stored in the camera’s memory to an MO/Zip® drive via the SCSI terminal when in the FREEZE or PLAY mode. Use a formatted DOS/V disk.

	SEND
	MENU			MODE
	SCSI
			SEND	REC
				AW/SEL MODE
	MENU		UP	DOWN SET
				PLAY
SCSI				FREEZE
				LENS
terminal	MONITOR
	REMOTE			DC IN
	ON 1	2 3	4	ON 1 2 3 4
	SEE INSTRUCTION			Undefined
	Dip switches
	Display example when an
confirmationOutput	MO disk is used.
	WR I T E TO MO
		A C C E P T
	F I L E NAME : F 7 0_0 0 01.T I F
	SCSI output mark
	Number of recordable
	shots remaining
	SCSI output image mark
completed	WR I T E TO MO
Output
				O K
	F I L E	NAME: F70_0 0 0 1.T I F

Set to either the FREEZE (
page 36) or PLAY (
page 37) mode.

1. Check to make sure that dip switches 1 and 2 are set to OFF as shown in the diagram on the left.

2. Press the SEND button. The data will be sent to the MO (Zip®) disk and a WRITE TO MO (ZIP) ACCEPT FILE NAME: F70_.TIF message will appear for ap- proximately 3 seconds on the monitor connected to the MONITOR terminal.

At this time an SCSI output mark will appear.

MEMO

•Pressing the SEND button during printing will display F70_????.TIF. For the file name, check the name displayed after saving to the disk.

3.When data is successfully written to the MO (Zip®), WRITE TO MO (ZIP) OK FILE NAME:F70_.TIF will appear for approximately 3 seconds. (each  indi- cates a number)

4.If data is not successfully written to the MO (Zip®), one of the following error messages will appear for approxi- mately 3 seconds.

ERROR : SCSI (check the cable)

ERROR : WRITE (write error)

ERROR : FORMAT (format the disk)

ERROR : DISKFULL (disk is full)

ERROR : DIRECTRYFULL (directory error)

ERROR : READ (read error)

ERROR : MO (Other MO error)

ERROR : ZIP (Other ZIP error)

BUFFER IS FULL :

When sending more than 32 images, no. 33 and after will be displayed.

ALL VIDEO MEMORY IS FULL :

When the SCSI output mark is , the display is made when pressing the FREEZE button.

E38