JVC KY-F70B manual E17, Zoom lens, S14⋅7.3DA-D24

Mounting the lens

Follow the procedure shown below when mounting an auto-iris lens. For further details, see the instruction manual of the lens and lens remote control.

CAUTION

• Perform mounting of the lens with the power of the camera turned OFF. Mounting with the power on

could result in damage.	4mm or less
• Lens is not included with this unit.
To avoid damaging the main unit, make sure that the lens mount of the lens to be
used is 4mm or less.	Lens
Camera head	3. Lock
	Male

Thread section

Mount clamp ring

Lens

2.

Compatible

B 0 7 -F Y K CAMERA DIGITAL

-MOUNT C

4. Lock

Female

zoom lens

FUJINON

S14⋅7.3DA-D24

1. Remove the lens mount cap. At this time, take mount.

Lens remote control

Compatible lens remote control

FJINON, RMD-10, RMD-20

caution so that dust do not enter inside the

2. To mount the lens, lightly press the thread section of the lens mount onto the thread section of the main unit, then turn the mount clamp ring slowly clockwise until it is securely tight- ened.

MEMO

To change the position of the lens rotation:

￿First, turn the mount clamp ring counterclockwise (1/4 turns) with the lens facing you.

￿Slowly turn the lens and after adjusting the position, retighten the mount clamp ring.

3.Insert the camera cable of the lens into the lens connection terminal on the rear of the main unit, then securely lock.

The iris control is made automatically from the camera.

When using a manual iris lens, set the IRIS MODE to MANUAL (
page 50).

4.When using the lens remote control, connect the lens control cable (female) to the remote control.

When operating the lens iris manually by lens remote control connection, set IRIS MODE to manual. (
page 50)

E17