JVC KD-SX780 manual To set the clock display - CLOCK, To select the level meter - LEVEL, English

To set Custom Equalizer Link – CEQ LINK

A different sound mode (C-EQ) can be stored in memory for each source so that you can change the sound modes simply by changing the sources. When shipped from the factory, this mode is deactivated.

•LINK ON: Different sound modes for different sources.

•LINK OFF: One sound mode for all sources.

To set the clock display – CLOCK

You can set the clock to be shown on the display when the unit is turned on.

When shipped from the factory, the clock is set to be shown on the display.

• ON:	Clock display is turned on.
• OFF:	Clock display is turned off. When
	“OFF” is selected, the current source
	name or station band appears
	instead of the clock display (except
	when “LINE IN” is selected as the
	source).

To select the level meter – LEVEL

You can select the level display according to your preference.

When shipped from the factory, “AUDIO 2” is selected.

•AUDIO 1: Level meter illuminates from bottom to top.

•AUDIO 2: Alternates level meter (moves from bottom to top) and illumination

	display.
• OFF:	Erases the audio level indicator.

To select the dimmer mode – DIMMER

(only for KD-SX8250)

When you turn on the car head lights, the display automatically dims (Auto Dimmer).

When shipped from the factory, Auto Dimmer mode is activated.

• AUTO:		Activates Auto Dimmer.
•	OFF:	Cancels Auto Dimmer.
•	ON:	Always dims the display.

Note:

Auto Dimmer equipped with this unit may not work correctly on some vehicles, particularly on those having a control dial for dimming.

In this case, set the dimmer mode to “ON” or “OFF.”

To turn on/off the key-touch tone – BEEP

You can deactivate the key-touch tone if you do not want it to beep each time you press a button. When shipped from the factory, the key-touch tone is activated.

• ON:	Activates the key-touch tone.
• OFF:	Deactivates the key-touch tone.

To select the external component to use

–EXT IN

You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).

To use the external component as the playback source through this unit, you need to select which component – CD changer or external component

– to use.

When shipped from the factory, CD changer is selected as the external component.

• LINE IN: To use the external component other than CD changer.

• CHANGER: To use the CD changer.

Note:

For connecting the Line Input Adaptor KS-U57 and the

external component, refer to the Installation/Connection Manual (separate volume).

To adjust the auxiliary input level – AUX ADJ

Adjust the auxiliary input level properly when an external component is connected to the MP3 INPUT jack.

When shipped from the factory, the auxiliary input level is set at level “00.”

If the input level of the connected component is not high enough, increase the input level properly. Without adjusting the line input level, you may be surprised at a loud sound when you change the source from the external component to another source.

ENGLISH

19