Selecting the scroll mode

You can select the scroll mode for the name display and disc information if it consists of more than 8 characters. When shipped from the factory, Auto Scroll mode is set to “ONCE.”

•ONCE: Scrolls only once.

•AUTO: Repeats the scroll (5-second intervals in between).

•OFF: Cancels Auto Scroll.

1Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

2Select “SCROLL” with ¢ or 4.

3Select the desired mode with the control dial. The scroll mode changes as follows:

ONCE AUTO OFF

Note:

Even if the scroll mode is set to “OFF,” you can scroll the display by pressing DISP for more than 1 second.

Selecting the external component to use

You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor KS-U57 (not supplied).

To use the external component as the playback source through this unit, you need to select which component — CD changer or external component — to use. When shipped from the factory, CD changer is selected as the external component.

• LINE IN: To use the external component other than CD changer

• CHANGER: To use the CD changer

1To change the source to FM, AM or CD, press FM/AM or CD.

2Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display.

3Select “LINE IN” with ¢ or 4.

4Select the desired mode with the control dial.

The external component selecting mode changes as follows:

LINE IN CHANGER

Note:

For connecting the Line Input Adaptor KS-U57 and the external component, refer to the Installation/ Connection Manual (separate volume).

ENGLISH

33