TROUBLESHOOTING

ENGLISH

48

What appears to be trouble is not always serious. Check the following points before calling a service center.

 

Symptoms

 

Causes

 

Remedies

 

 

 

 

 

 

 

 

 

•

CD cannot be played back.

CD is inserted upside down.

Insert the CD correctly.

 

 

 

 

 

 

 

 

•

CD sound is sometimes

You are driving on rough roads.

Stop playing CD while driving on

 

interrupted.

 

 

 

rough roads.

 

 

 

 

 

 

 

 

 

 

The disc is scratched.

Change the disc.

 

 

 

 

 

 

 

 

 

 

Connections are incorrect.

Check the cords and

 

 

 

 

 

connections.

 

 

 

 

 

 

 

• Sound is sometimes

Connections are incorrect.

Check the cords and

 

interrupted.

 

 

 

connections.

 

 

 

 

 

 

• Sound cannot be heard from

The volume is turned to the

Adjust it to the optimum level.

 

the speakers.

minimum level.

 

 

 

 

 

 

 

 

 

 

 

 

Connections are incorrect.

Check the cords and

 

 

 

 

 

connections.

 

 

 

 

 

 

• SSM (Strong-station

Signals are too weak.

Store stations manually.

 

Sequential Memory)

 

 

 

 

 

 

 

automatic preset does not

 

 

 

 

 

 

 

work.

 

 

 

 

 

 

 

 

 

 

 

 

• Static noise while listening

The antenna is not connected

Connect the antenna firmly.

 

to the radio.

firmly.

 

 

 

 

 

 

 

 

• “NO DISC” appears on the

No CD is in the magazine.

Insert CDs into the magazine.

 

display.

 

 

 

 

 

 

 

CDs are inserted incorrectly.

Insert them correctly.

 

 

 

 

 

 

 

 

• “RESET 8” appears on the

This unit is not connected to a

Connect this unit and the CD

 

display.

CD changer correctly.

changer correctly and press

 

 

 

 

 

the reset button of the CD

 

 

 

 

 

changer.

 

 

 

 

 

 

• “RESET 1-RESET 7”

 

 

 

Press the reset button of the

 

appears on the display.

 

 

 

CD changer.

 

 

 

 

• CD can be neither played

The unit may function

Press CD and SEL at the same

 

back nor ejected.

incorrectly.

time for several seconds.

 

 

 

 

 

(“PLEASE” and “EJECT” appear

 

 

 

 

 

on the display alternately.) When

 

 

 

 

 

you open the control panel by

 

 

 

 

 

pressing 0, be careful not to

 

 

 

 

 

drop CD when it is ejected.

 

 

 

 

• This unit does not work at

The built-in microcomputer

Press and hold both SEL and

 

all.

may function incorrectly due to

 

at the same time for

 

 

 

 

• The CD changer does not

noise, etc.

several seconds to reset the

 

work at all.

 

 

 

unit. (The clock setting and

 

 

 

 

 

preset stations stored in

 

 

 

 

 

memory are erased.) (See

 

 

 

 

 

page 2.)