|
| Storing your own sound | |
ENGLISH | |||
| adjustments | ||
|
| ||
|
|
| |
|
| You can adjust the sound modes (BEAT, POP, | |
|
| SOFT) to your preference and store your own | |
|
| adjustments in memory. | |
|
| • There is a time limit in doing the following | |
|
| procedure. If the setting is canceled before you | |
|
| finish, start from step 1 again. | |
|
| 1 Call up the sound mode you want | |
|
| to adjust. | |
|
| • See page 11 for details. | |
|
| SOUND |
BEAT POP SOFT LOUD
2 Select “BAS” (Bass) or “TRE” (Treble).
4 To turn on or off the loudness function.
Each time you press LOUD, the loudness
function turns on and off alternately. See page
11 for details.
LOUD
5 Repeat steps 2 and 3 to adjust the other items.
6 Press and hold SOUND until the sound mode you have selected in step 1 flashes on the display.
Your setting is stored in memory.
SOUND
BEAT POP SOFT LOUD
| 7 Repeat the same procedure to store |
| other settings. |
| To reset to the factory settings |
3 Adjust the bass or treble level. | Repeat the same procedure and reassign the |
preset values listed in the table on page 11. |
• See page 11 for details.
12
