ENGLISH
Manual preset
You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.
Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band
1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).
F M | Each time you press the button, |
|
the FM band changes as follows:
FM1FM2FM3
Storing your favorite stations into the
You can preset an FM or AM station (such as your favorite station or traffic announcement station); and recall it by one touch operation even if the unit is turned off.
Ex.: Storing an FM station of 88.3 MHz into the
1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).
2 Tune into a station of 88.3 MHz.
To tune into stations of
F M
Each time you press the button, the FM band changes as follows:
higher frequencies.
To tune into stations of lower frequencies.
ST
BEAT POP SOFT LOUD
FM1FM2FM3
2 Tune into a station (in this example, of 88.3 MHz).
3 Press and hold the number button (in this example, 1) for more than 2 seconds.
ST
BEAT POP SOFT LOUD
Preset number “P1” flashes for a while.
3 Press and hold the button for more than 2 second.
"P0" flashes on the display, showing that the station has been preset.
ST
BEAT POP SOFT LOUD
4 Repeat the above procedure to store other stations into other preset numbers.
Notes:
• A previously preset station is erased when a new station is stored in the same preset number.
• Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery
Notes:
•A previously preset station is erased when a new station is stored in the EX button.
•The preset station is erased when the power supply to the memory circuit is interrupted
(for example, during battery replacement). If this occurs, preset the station again.
8
replacement). If this occurs, preset the stations again.