JVC KS-F184 manual Tuning in to a preset station, To tune into the favorite station

4 Repeat the above procedure to store other stations into other preset numbers.

Notes:

•A previously preset station is erased when a new station is stored in the same preset number.

•Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.

Tuning in to a preset station

You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 7 and 8.

1 Select the band (FM1 – 3, AM).

2 Select the number (1 – 6) for the preset station you want.

Storing your favorite station in to the one-touch operation button (EX—extra)

You can preset an FM or AM station (such as your favorite station or traffic announcement station); and recall it by one touch operation even if the unit is turned off.

Ex.: Storing an FM station of 92.5 MHz in to the one-touch operation button (EX).

1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).

2 Tune in to a station (in this example, of 92.5 MHz).

3 Press and hold the button for more than 2 seconds.

“P0” flashes on the display, showing that the

station has been preset.

Notes:

•A previously preset station is erased when a new station is stored in the EX button.

•The preset station is erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the station again.

To tune into the favorite station

The unit automatically turns on (if it has been off).

Your favorite station is tuned in—except when the tape is playing.

•If you press the button again, the last received station will be tuned in.

8