RADIO OPERATIONS
ENGLISH
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Note:
When a cassette is in the cassette compartment, you cannot select the tuner. Be sure to eject the cassette from the cassette compartment to listen to the radio.
Searching for a station automatically: Auto search
1 Select the band (FM1 – 3, AM).
FM1 | FM2 | FM3 |
| AM |
|
Selected band appears.
Searching for a station manually: Manual search
1 Select the band (FM1 – 3, AM).
FM1
FM2 
FM3
AM 
Note:
This receiver has three FM bands (FM1, FM2, FM3). You can use any one of them to listen to an FM broadcast.
2 Press and hold 
or 
until
“M” (manual) starts flashing on the display.
Lights up when receiving an FM stereo broadcast with sufficient signal strength.
Note: | 3 Tune in to a station you want while | |||
This receiver has three FM bands (FM1, FM2, | ||||
FM3). You can use any one of them to listen to | “M” (manual) is still flashing. | |||
an FM broadcast. |
|
|
| To tune in to stations of |
|
|
|
| |
2 Start searching for a station. |
|
|
| higher frequencies |
|
|
|
| |
|
|
|
| |
To search for stations of higher frequencies
To search for stations of lower frequencies
When a station is received, searching stops.
To stop searching before a station is
received, press the same button you have
pressed for searching.
To tune in to stations of lower frequencies
•If you release your finger from the button, the manual mode will automatically turns off after 5 seconds.
•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz intervals for AM) until you release the button.
6
