ENGLISH
Selecting the initial CD information display
You can select what type of the CD playback information to be initially shown on the display when you start playing a CD. When shipped from the factory, the disc number and track number information is selected to be shown.
•DISC: Disc number and track number appear on the display.
•TIME: Elapsed playing time appears on the display.
1.Press and hold SEL (select) for more than 2 seconds to call up the general setting mode.
2.Press 
¢or 4
to select “CH DISP (changer display).”
3.Press + or – to select the desired mode.
The initial CD information display changes as follows:
TIME 
DISC
To see the other information while playing a CD, press DISP.
Each time you press the button, the information changes alternately.
Selecting the telephone muting
This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “MUTING 1” or “MUTING 2,” whichever mutes the sounds from this unit. When shipped from the factory, this mode is deactivated.
•MUTING 1: Select this if this setting can mute the sounds.
•MUTING 2: Select this if this setting can mute the sounds.
• OFF: | Cancels the telephone muting. |
1.Press and hold SEL (select) for more than 2 seconds to call up the general setting mode.
2.Press 
¢or 4
to select “TEL (telephone)”.
3.Press + or – to select the desired mode.
The telephone muting mode changes as follows:
MUTING 1
MUTING 2 
OFF 
24
