JVC KS-FX725R function, Turning on/off the loudness, Using the sound control memory, Advanced SCM

	Turning on/off the loudness
ENGLISH
	function
	(only for KS-F525)
	The human ear is less sensitive to low and high
	frequencies at low volumes.
	The loudness function can boost these
	frequencies to produce a well-balanced sound at
	low volume levels.
	Each time you press LOUD, the loudness
	function turns on and off alternately.

LOUD

Using the sound control memory

You can select and store a preset sound

adjustment suitable for each playback source

(Advanced SCM).

Selecting and storing the sound modes

Once you select a sound mode, it is stored in memory. It will be recalled every time you select the same source and will be shown on the display. A sound mode can be stored for each of the following sources — FM1, FM2, FM3, AM, tape and external components.

•If you do not want to store the sound mode separately for each playback source, but want to use the same sound mode for all the sources, see “To cancel Advanced SCM – SCM LINK” on page 25.

Select the sound mode you want.

Note:

For KS-FX725R, you can turn on/off the loudness function using the SEL button and the control dial (see page19).

Ex.: When you select “BEAT”

Each time you press the button, the sound mode changes as follows:

SCM OFF BEAT SOFT POP

20