Searching a station manually: Manual search
1 Select the band (FM1 – 3, AM).
FM1 
FM2 
FM3 
AM
FM1 
FM2 
FM3
AM
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an FM broadcast.
2 Press and hold ¢ 
or 4 
until “M (manual)” starts flashing on the display.
3 Tune in to a station you want while “M” is flashing.
Press ¢ 
to tune in to stations of higher frequencies.
Press 4 
to tune in to stations of lower frequencies.
•If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.
•If you hold down the button, the frequency keeps changing (in 50 kHz intervals (87.5 MHz – 108 MHz), in 30 KHz intervals (65 MHz – 74 MHz) for FM and 9 kHz intervals for AM – MW/LW) until you release the button.
When an FM stereo broadcast is hard to receive:
Press MO RND (for
•Each time you press the button, the MO indicator lights up and goes off alternately.
Lights up when receiving an FM broadcast in stereo.
MO
RND | MO |
ENGLISH
Selected band appears.
When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved (the ST indicator goes off).
To restore the stereo effect, press the same
button again.
7
