EXTERNAL COMPONENT OPERATIONS
DISP
DAB
TP
RDS
PTY
7 | 8 | 9 | 10 | 11 | 12 | MO |
ENGLISH
This section is only for
Playing an external component
You can connect the external component to the CD changer jack on the rear using the Line Input Adaptor
•For connecting the Line Input Adaptor
•Before operating the external component using the following procedure, select the external input correctly. (See “To select the external component to use – EXT IN” on page 25.)
2 Turn on the connected component and start playing the source.
3 Adjust the volume.
4 Adjust the sound characteristics you want. (See page 19.)
1 Select the external component (CD-CH).
•If “LINE IN”* does not appear on the display, see page 25 and select the external input (“LINE IN”).
*Displayed only when one of the following sources is selected — FM, AM and Tape.
Note on
When you press
comes on. You do not have to press to turn on the power.
29