TAPE OPERATIONS
ENGLISH
Multi |
|
Music | TAPE |
Scan |
|
Listening to a cassette
You can play back type 1 (normal) tapes.
1 Open the control panel.
To stop play and eject the cassette
Press 0.
Tape play stops, the control panel opens and then the cassette automatically ejects from the cassette compartment.The source changes to the previously selected one.
If you change the source, tape play also stops (without ejecting the cassette this time).
•You can eject the cassette while the unit is turned off by pressing 0.
2 Insert a cassette into the cassette compartment.
The unit turns on and tape play starts
automatically.
3 Close the control panel by hand.
4 Select the tape direction.
Each time you press 23, the tape direction changes alternately forward
( 
) and reverse
( 
).
Note on
When a cassette is already in the cassette compartment, select tape as the source by pressing TAPE
10
To fast-forward and rewind a tape
Press ¢ 
for more than 1 second to
When the tape reaches its end, the tape is reversed and playback starts from the beginning of the other side.
Press 4 
for more than 1 second to rewind the tape. When the tape reaches its end, playback of the same side starts.
To stop fast forward and rewind at any position on the tape, press 23.
Tape play starts from that position on the tape.
Notes:
•When one side of the tape reaches its end during play, the other side of the tape automatically starts playing. (Auto Reverse)
•When the tape reaches its end while
