When “CEQ LINK” is set to “LINK ON,” The selected sound mode can be stored in memory for the current source.

Each time you change to the same source, the same sound mode is also recalled and shown on the display. The C-EQ indicator also flashes.

When “CEQ LINK” is set to “LINK OFF”

The selected sound mode effect applies to any source.

Storing your own sound adjustments

You can adjust the sound modes to your preference and store your own adjustments in memory.

There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

1 Call up the sound mode you want to adjust.

The last selected sound mode is

recalled and applied to the current sound.

3 Select the item you want to adjust.

• See page 13 for details.

4 Adjust the level.

To increase the level.

To decrease the level.

Equalization pattern changes as you adjust the bass or treble.

Ex.: When you adjust “TRE”

5 Repeat steps 3 and 4 to adjust the other items.

6 Repeat the same procedure to store other sound modes.

ENGLISH

Sound mode indicator flashes

To reset to the factory settings, repeat the

Ex.: If you have selected “ROCK” previously

same procedure and reassign the preset values

listed in the table on page 14.

 

2 Select the sound mode you want to adjust.

15

Page 15
Image 15
JVC KS-FX811, KS-FX911 manual Storing your own sound adjustments, Call up the sound mode you want to adjust