Bluetooth (continued)
BT FUNCTION Menu Display
Notes:
¡This setting is feasible only in the Bluetooth mode.
¡Each item can be set in the BT HF mode and BT AUDIO mode independently.
1 Hold down [VOL-
UME] (PUSH SEL:
SELECT) for 2 sec.or more.
2 Press [PUSH SEL: SELECT] to select a mode to be adjusted.
For using the remote control, use [SEL].
3 Perform each set- ting.
PAIRING
Establishment of pairing with the devices to be connected
Note: This is displayed only when no information about the connected devices last time exists.
Press [BAND].Notes:
¡To cancel the operation, press [BAND].
¡When pairing is successfully established, “*** CON- NECTED” appears. (*** indicates the device name.)
¡When pairing is not successfully established, “PAIR ERR” appears.
¡If 2 minutes elapse before pairing establishment, “TIME OUT” appears.
✽✽✽✽/CONNECT
Establishment of pairing with the devices last time connected
Notes:
¡This is displayed only when pairing is not established with the connected devices last time.
¡*** indicates the device name with connection infor- mation.
Press [BAND].
Notes:
¡To cancel the operation, press [BAND].
¡When pairing is successfully established, “*** CON- NECTED” appears. (*** indicates the device name.)
¡If 2 minutes elapse before pairing establishment, “ERROR” appears.
✽✽✽✽/DISCONNECT
Cancellation of pairing with the devices currently connected
Notes:
¡This is displayed only when pairing is successfully established.
¡*** indicates the name of the connected device.
Press [BAND].
Notes:
¡To cancel the operation, press [BAND].
¡When pairing is successfully canceled, “*** DISCON- NECTED” appears. (*** indicates the device name.)
¡If 2 minutes elapse before pairing cancellation, “ERROR” appears.
PINCODE
The PIN code of the device with which pairing is established shall be entered. (default: 0000)
Note: This is displayed only when no information about the connected devices last time exists.
1 | Use []], [[], [}] and [{] for PIN code entry. |
2 | Press [BAND] to determine the entry. |
Note: The buttons from [0] to [9] on the remote control are also available for PIN code entry.
NEW PAIR
Establishment of new pairing
Note: This is displayed only when information about the connected devices last time exists.
Press [BAND].
DELETE
Deletion of information about the connected device last time
Note: This is displayed only when information about the connected devices last time exists.
Press [BAND].
Note: When information is successfully deleted, “DELETED” appears.
