Panasonic CQ-DX200W manual IPod Control, Playing, File Selection Pause

iPod Control

Connection of the optional iPod adapter (Direct cable for iPod) (CA-DC300N) allows users to operate the iPod including file selection and file sequence change with the buttons on this unit.

	1 Connect the iPod.
	2 Press [SRC] to select the iPod mode.
Flow		Playback starts.
		Note: If playback does not start, press [BAND]
		(5y).
Operation
	3 Select a desired portion.
		File Selection			Pause
		[7]: Next file			Press [BAND] (5y).
		[6]: Beginning of the current file			Press again to cancel.
		For the previous file, press twice.
		Note: Hold down for fast forward/reverse.
	The type with which playback data is classified is
	selectable.
	1 Press [}] (LIST) to call up the play
		mode selection screen.
	2 Turn [VOL] to select the play mode.
		PLAYLIST: Playback by playlist		4 Turn [VOL] to select the portion to play.
		ARTIST:	Playback by artist
		ALBUM:	Playback by album
					Notes:
		For using the remote control, use [}] or [{].
					¡ For selecting ARTIST, the ALBUM selection
		Notes:			screen appears after selecting an artist name.
		¡ When the []] button is pressed, the regular			¡ When the []] button is pressed, the previous
selection		screen appears.			screen appears.
		¡ Displayable length of playlist/artist/album name:			For using the remote control, use [BAND] (SET).
		within 8 characters (Otherwise, it cannot be dis-		5 Press [PUSH SEL] to determine the
		played completely at the above playing mode.)			selection.
Mode	3 Press [PUSH SEL] to determine the				Note: Files without an album name or an artist
		For using the remote control, use [BAND] (SET).
		selection.			name are not playable in the playing mode of the
Playing					album or artist display respectively.

54CQ-DX200W