ENGLISH
BASIC OPERATIONS
|
| Multi |
|
|
| Music | TAPE |
|
| Scan | |
|
|
| |
1 | 3 |
| 2 |
Turning on the power
1 Turn on the power.
“HELLO” appears on the
display.
3 Adjust the volume.
To increase the volume.
To decrease the volume.
Note on
When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power.
2 Select the source.
Volume level appears.
Volume or audio level (see page 18) indicator
| FM1 | FM2 |
| AM | FM3 |
TAPE | TAPE | CD* |
|
| (or LINE IN)** |
To operate the tuner (FM or AM), see pages 7 – 9.
To operate the tape, see pages 10 – 12.
To operate the CD changer, see pages 20 – 21.
To operate the external component, see page 22.
Note:
*Without connecting the CD changer, you cannot select the CD changer as the source.
**To select the external component other than the CD changer, EXT IN must be set to LINE IN. (See page 18.)
4 Adjust the sound as you want. (See pages 13 – 15.)
To drop the volume in a moment
Press 
briefly while listening to any source. “ATT” starts flashing on the display, and the volume level will drop in a moment.
To resume the previous volume level, press the button briefly again.
•If you turn the control dial clockwise, you can also restore the sound.
To turn off the power
Press and hold 
until “SEE YOU” appears on the display.
Note:
When you use this unit for the first time, set the
6
