3 Tune in to a station you want while
ENGLISH | “MANU” is flashing. |
|
|
| |
| Press ¢ | to tune |
| in to stations of higher | |
| frequencies. |
|
| Press 4 | to tune |
| in to stations of lower | |
| frequencies. |
|
•If you release your finger from the button, the manual mode will automatically turn off after 5 seconds.
•If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and 9 kHz for AM) until you release the button.
When an FM stereo broadcast is hard to receive:
Storing stations in memory
You can use one of the following two methods to store broadcasting stations in memory.
•Automatic preset of FM stations: SSM (Strong- station Sequential Memory)
•Manual preset of both FM and AM stations
FM station automatic preset: SSM
You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3).
1 Select the FM band (FM1 – 3) you want to store FM stations into.
Each time you press the button, the band changes as follows:
FM1 |
| FM2 |
| FM3 |
| AM |
|
|
| ||||
(F1) |
| (F2) |
| (F3) |
|
|
8
1Press MODE to enter the functions mode while listening to an FM stereo broadcast.
“MODE” appears on the lower part of the display, and the number buttons work as different function buttons.
2Press MO (monaural), while “MODE” is still on the display, so that the MO indicator lights up on the display.
Then, each time you press MO (monaural), the MO indicator lights up and goes off alternately.
Lights up when receiving an FM broadcast in stereo.
When the MO indicator is lit on the display, the sound you hear becomes monaural but the reception will be improved (the ST indicator goes off).
2 Press and hold both buttons for more than 2 seconds.
“SSM” appears, then disappears when automatic preset is over.
Local FM stations with the strongest signals are searched and stored automatically in the band number you have selected (FM1, FM2 or FM3). These stations are preset in the number buttons — No.1 (lowest frequency) to No.6 (highest frequency). When automatic preset is over, the station stored in number button 1 will be automatically tuned in.
