JVC KS-LX200R service manual Pin No

KS-LX200R

Pin No.	Symbol	I/O	Function
51	DM0	O	Door motor negative signal output.
52	DM1	O	Door motor positive signal output.
53	ST	I	Stereo signal input.
54	LOCAL	-	Non connect.
55	MONO	O	Manual ON/OFF select signal output.
56	CA-SW1	I	DOOR/TRAY open/close detect switch signal input.
57	CA-SW2	I	DOOR/TRAY open/close detect switch signal input.
58	CA-SW3	I	DOOR/TRAY open/close detect switch signal input.
59	CA-SW4	I	DOOR/TRAY open/close detect switch signal input.
60	CA-SW5	I	DOOR/TRAY open/close detect switch signal input.
61	VCR-CONT	-	Non connect.
62	AFCK	O	AF check output.
63	SEEK/STOP	O	AUTO SEEK/STOP select signal output.
64	SD	I	Station detector input.
65	FM/AM	O	FM/AM select signal output.
66	PLL-CE	O	Chip enable signal output.
67	PLL-DA	O	Data output.
68	PLL-CK	O	Clock signal output.
69	BAND IN	I	AM detect signal input.
70	TEL-MUTE	I	Telephone.
71	AMP KILL	-	Non connect.
72	VSS	-	Connect to GND
73	DIMMER-IN	I	DIMMER signal input.
74	DSI	I	Power save 1.
75	POWER	O	Power ON/OFF select signal output.
76	CD-ON	-	Non connect.
77	MUTE	O	Mute signal output.
78	W-LPF1	O	Woofer LPF 1 signal output.
79	W-LPF2	O	Woofer LPF 2 signal output.
80	W-MUTE	O	Woofer mute signal output.
81	VDD	-	Power supply.
82	VOL-DA	O	Data output.
83	VOL-CLK	O	Clock signal output.
84	CF-SEL	I	CF select signal input.
85	NC	-	Non connect.
86	LCD RST	O	LCD reset signal output.
87	LCD-CE2	O	Chip enable 2 output.
88	DMK	O	Motor speed control signal output.
89	TMK	O	Tray motor control signal output.
90	STAGE1	I	Initial setting.
91	MOTOR	O	Mecha Motor signal output.
92	MODE	I	Mecha mode position detection input.
93	STANDBY	I	Standby position derection input.
94	TEST	I	Test terminal
95	TAPE-IN	O	Cassette in detection input.
96	SUBMO-	O	Sub motor clock direction drive output.
97	SUBMO+		Sub motor clock oppositte direction drive output.
98	TAPE-END	I	Tape end detection input.
99	KICK	O	Kick output.
100	VOICE IN	I	Voice control signal input.

1-23