JVC KT-SR1000 manual Finding the Best Antenna Mounting Location

Installation in Your Car with KS-K6002/KS-K6001 (continued)

4For KS-K6001:

A If your car stereo does not have a line input (LINE IN or AUX)...

Plug the cassette adapter into the back of the cradle—AUDIO OUT.

B If your car stereo has a line input (LINE IN or AUX)...

Plug the supplied audio cable into the back of the cradle—AUDIO OUT.

•Plug the audio cable’s white (L ch) and red (R ch) connectors into your car stereo.

For KS-K6002:

Activate the FM signal transmitter (see page 24), and set the FM frequency output selector to select one of the following frequencies—88.1 MHz, 88.3 MHz,

88.5 MHz, and 88.7 MHz.

•It is recommended to preset the frequency selected by the FM frequency output selector into your car stereo so you can easily tune in to the frequency.

Finding the Best Antenna Mounting Location

1Temporarily plug the antenna into the back of the cradle—SAT (MAIN) until it is firmly seated.

2Find an antenna location on a metal surface of your car—at least 30 cm ⋅ 30 cm (12 inches ⋅

12 inches), and at least 15 cm (6 inches) from a window.

•The antenna’s powerful magnet will secure it to the metal surface.

•Best reception is achieved with the antenna mounted on the roof or trunk for convertibles.

•If your car has a roof rack or skid ribs, it may be necessary to mount the antenna off-center.

3Temporarily plug the cigarette lighter adapter into the cigarette lighter.

8