JVC KT-SR1000 manual Alarm Clock, Program Alert, Set Alarm, Alarm Time default—12:00pm

Alarm Clock

You can set your JVC PnP to turn on at a specific time.

The last selected stream prior to shutdown will be played when the Alarm turns on your JVC PnP.

Set Alarm:

Press CHANNEL 5 / ∞ (or CH + / –) to select either “Alarm On” or “Alarm Off (default)”, then press

SELECT.

Alarm Time (default—12:00pm):

Press CATEGORY # / @ (or CAT + / –) to set the hour, press CHANNEL 5 / ∞ (or CH + / –) to set the minute, then press SELECT.

AM or PM will switch automatically as you advance the time.

Note: If your JVC PnP cannot receive the SIRIUS signals (satellite and terrestrial) correctly when the alarm time comes, you may hear a series of alarm tones.

Program Alert

You can program your JVC PnP to switch to a specified stream at a specified time.

•To use your programmed setting, make sure to set “Program Alert” to “Program Alert On”.

The following settings are possible on this sub-menu screen—

•Time/Day (default—12:00pm/Monday)

•Stream (default—Currently Playing Stream)

•Program Alert (default—Off)

Time/Day:

Press CHANNEL 5 / ∞ (or CH + / –) to select either “Time” or “Day”, then press SELECT.

•Time: To set the time.

Press CATEGORY # / @ (or CAT + / –) to set the hour, then press CHANNEL 5 / ∞ (or CH + / –) to set the minute, then press SELECT.

AM or PM will switch automatically as you advance the time.

•Day: To set the day.

Press CATEGORY # / @ (or CAT + / –) to select the day—Monday, Tuesday, Wednesday, Thursday, Friday, Saturday or Sunday, then press SELECT.

Make sure to set both “Time” and “Day” correctly.

29