JVC KT-SR1000 manual 3Confirmation Tone Options, 4FM Transmitter Options, 5Add or Skip

Dimming Control: Press CHANNEL 5 / ∞ (or CH

+/ –) to select either “Manual” or “Automatic”, then press SELECT.

• Manual: A horizontal bar graph is displayed. Press CATEGORY # / @ (or CAT + / –) to adjust the display brightness manually, then press SELECT. (You can also use CHANNEL 5 / ∞ (or CH + / –) for adjustment.)

• Automatic: The low dimming limit “L” and high dimming limit “H” will always maintain a minimum separation of the settings.

–Adjust the low dimming limit “L” and high dimming limit “H” using CATEGORY # / @ (or CAT + / –).

–Toggle between “L” and “H” using CHANNEL 5 / ∞ (or CH + / –).

–Confirm all settings using SELECT.

Font Type: Press CHANNEL 5 / ∞ (or CH + / –) to select the font type shown on the display, then press

SELECT.

3Confirmation Tone Options

Press CHANNEL 5 / ∞ (or CH + / –) to select either “On” or “Off”, then press SELECT.

•On: To activate the confirmation beep when you press (POWER) or some operation buttons.

•Off: To deactivate the confirmation beep.

4FM Transmitter Options

This option functions only when your JVC PnP is connected to the Car Docking Kit KS-K6002.

Press CHANNEL 5 / ∞ (or CH + / –) to select either “On” or “Off”, then press SELECT.

•FM On: To activate the FM transmitter.

•FM Off: To deactivate the FM transmitter.

Note: It is recommended that you select “FM Off” if you have connected your JVC PnP using a audio cord or cassette adapter.

5Add or Skip

You can skip unwanted streams while tuning.

Upon entering this mode, a stream list appears with the currently playing stream highlighted.

24