7
Introduction to the Roles of the System Components (continued)
| The numbers in the circles ( | ) |
indicate the page on which an explanation is provided in this manual.
ENGLISH
POWER MODE MENU
Used to turn the power source ON and OFF
Normally:
Changing the channel setting in the upward or downward direction (only when connected to the
When setting various menus:
Menu selection
When setting various adjustment modes:
Adjustment and switching
Used to display, select and determine the various adjustments (screen, menu).
FRANÇAIS ESPAÑOL
Used to display the configuration screen for changing the input source and the various function menus.
When set to the TV mode, channel numbers are shown. Note, however, that television broad- cast reception requires connection to the separately sold
Remote sensor
Used when the JVC mobile TV tuner system
Dimmer sensor
This sensor automatically adjusts the screen brightness. (When Auto Mode is set for the Dimmer Setting, the screen brightness is automatically adjusted to one of 12 levels to suit the surrounding brightness.)
STAND BY (R), ON (G) 
When the power is off ... red
When the power is on ... green
Speaker
(on the back side)
Screw holes are provided for attaching the monitor stand (on the bottom side).
(1/4 inch unify screw, maximum length of 4.5 mm)
Terminal for connecting the cable from the controller unit (on the right side)
