Connections
9
ENGLISH
PD-Z50DX4 / LCT1781-001A / English
Connecting the TV and receiverUse the supplied system cable to connect the
TV to the receiver.
The two connectors are of different shapes.
Ensure that the pins on connector 1 are
oriented correctly, press the connector into
the socket, and tighten the screws at left and
right to lock it in place.
Press connector 2 firmly into place until it is
locked.
Disconnecting the system cable
Release connector 1 by unscrewing the
screws at left and right and removing it from
the socket.
Release connector 2 by removing it from the
socket while pressing the release bottoms on
either side.
Connecting the aerial and video cassette recorder (VCR)• Aerial cable is not supplied. Use a good
quality 75-ohm coaxial cable.
• Read the manual that came with the VCR
before connecting.
If not connecting a VCR (see Fig. A):
Connect an aerial cable to the aerial
socket on this receiver.
2
1
2
1
SUB WOOFER
OUT
AUDIO
OUT
VIDEO
OUT
R AUDIO L
R
YPbPr
L
AC IN
110~240V
S-
VIDEO
S-
VIDEO
IN
VIDEO-1
IN
VIDEO-2
RAUDIO L VIDEO
RAUDIO L/MONO VIDEO
YPbPr
RAUDIO L VIDEO
IN
VIDEO-3
CENTER
CHANNEL
INPUT
RL
DVI
ANALOG
AUDIO
IN
Fig. A
Back of the receiver
PD-Z50DX4_Eng.book Page 9 Wednesday, October 27, 2004 10:43 AM