JVC LCT2104-001A-A Cable Holder, Remove the terminal cover, No VCR Connection, TV Rear Panel, Cable or Antenna, Output Coaxial Cable (Attachment)

Quick Setup

Cable Holder

A cable holder which keeps your connection cables tidy is attached on the back of the stand. To open, loosen the screws with you fingers. After putting the cables in the cable holder, attach it to the back of the stand again by tightening the screws with your fingers.

LT-37X887, LT-37X787	LT-32X887, LT-32X787,
	LT-32X667

Remove the terminal cover

There are connection terminals behind the cover on the left in the back of the TV. Remove the cover before connecting an antenna or other devices. The cover can be removed by removing the hooks. When replacing the cover, place the side of the cover against the TV and insert the hooks.

Note:

• Leave the terminal cover off if they do not fit properly. Do not force to replace the cover. Doing so may damage the connection cables and cover.

No VCR ConnectionTV Rear PanelCable or AntennaOutput Coaxial Cable (Attachment)

13