ENGLISH
Setting MenuItem values shown in are factory settings.
zItems that can be configured differ according to the input signals.
Image > Image Adjust
A Contrast
Adjusts the contrast of the projected image. (Black) b50 f 50 (White)
B Brightness
Adjusts the brightness of the projected image. (Darken) b30 f 30 (Brighten)
C Color
Adjusts the colour density of the projected image. (Lighten) b50 f 50 (Darken)
D Tint
Adjusts the hue of the projected image. (Red) b30 f 30 (Green)
E Sharpness
Adjusts the outline of the projected image. (Soft) b30 f 30 (Sharp)
F DNR
Adjusts the strength of noise removal of the projected image. (Weak) 0 f 30 (Strong)
z“Contrast”, “Brightness”, “Color” and “Sharpness” can also be configured from the remote control. (pP12)
z“Tint” can only be adjusted when NTSC signals are input to the video or
Image > Color Temp.
G Color Temp.
Sets the colour temperature of the projected image.
| Low | Select this to give a reddish tinge to the image. | |
|
|
|
|
| Middle | Select this to have a balanced image. | |
|
|
|
|
| High | Select this to give a bluish tinge to the image. | |
|
|
|
|
|
| Red | (Less red) b255 f 0 (More red) |
|
|
|
|
| Memory10 | Green | (Less green) b255 f 0 (More green) |
|
|
|
|
|
| Blue | (Less blue) b255 f 0 (More blue) |
|
|
|
|
|
| Red | (Less red) b255 f 0 (More red) |
|
|
|
|
| Memory20 | Green | (Less green) b255 f 0 (More green) |
|
|
|
|
|
| Blue | (Less blue) b255 f 0 (More blue) |
|
|
|
|
*The red, green and blue colours can be adjusted and registered respectively.
zThis setting can also be configured from the remote control. (pP12)
Started Getting
Preparation
Operation Basic
Settings
Troubleshooting
Others
25