Menu Configuration—SET UP MENU (cont.)

Operation guide

Shows the buttons for each operation.

The menu automatically disappears in about 30 seconds after the previous operation.

Some items may not appear on the menu depending on the input or the input signal.

The items controlled by the MAKE system do not appear on the menu.

REMOTE SETTING

Setting for the external control (“External Control” on page 13)

Item

To do

Setting value

SYSTEM

Select the external control method for the MAKE/

MAKE, TRIGGER

 

TRIGGER terminal.

 

PORT F1 – PORT

Assign the control functions to the pins of the

VIDEO 1, VIDEO 2, RGB, DVI,

F6

MAKE/TRIGGER terminal.

STD., DARK ENHANCED, VIVID,

 

• You cannot change the functions assigned for

DYNAMIC, AUTO ADJ., SCAN SIZE,

 

“PORT F7” and “PORT F8.”

ASPECT, STAND BY/ON, – – – (no

 

 

function)

 

 

 

12

 

 

 

SYNC FUNCTION

 

 

 

Setting for the synchronization with signals

 

 

 

 

Item

To do

Setting value

SYNC TYPE

Select the sync signal for RGB input.

H/V. SYNC, C.SYNC, G.ON SYNC

NO SYNC ACTION

Select the screen status when no signal is

OFF, POWER SAVE (Power Save mode),

 

 

coming in.

GRAY BACK (Gray Back mode)

DELAY TIME

Select the period until the screen status

30 sec., 5 min., 15 min.

 

 

changes as selected in “NO SYNC ACTION”

 

 

 

after signals stop coming in.

 

• The C.SYNC input level is TTL (page 16).

STATUS DISPLAY Setting value: AUTO, OFF

About the Status Display” on page 9

CONTROL LOCK Setting value: OFF, ON

Turns on (or off) the control lock function to disable the buttons on the front panel.

The following operations are available even when this function is activated.

Turning on/off (on standby) the monitor

Displaying the SET UP MENU (by pressing button while pressing MENU button) and turning “CONTROL LOCK” to “OFF”

Operating the monitor by an external control

If you try other operations, “Control lock on!” appears on the screen.

all reset

Restores all the settings and adjustments of the monitor to the default.

• “HOUR METER X100h” will not be reset.

HOUR METER X100h

Displays the total hours of use. This item is used for maintenance of the monitor.

The hour is shown in 100-hour unit.

The hour will not be reset.

The hour is reset to “000” after the total hours of use have reached to “999.”

Use time less than 1 minute is not accumulated.

• “STAND BY/ON” is not available when “SYSTEM” is “MAKE.”

Page 13
Image 13
JVC LM-H191, LM-H171 Setting for the external control External Control on, Setting for the synchronization with signals