Page 3 October 23, 2001 10:00 am

Remote control

* Not function with this recorder.

On-screen display

If you press OK on the remote control when “O.S.D.” is set to
“ON”, you can see the current recorder status on the TV screen.
After about 5 seconds, indications other than the time counter
disappear. To clear the time counter, press OK again.
The indications are not recorded even if the recorder is in the
recording mode.
AChannel and auxiliary input
BClock time
CDay
DTime counter
ETape position
FTape direction
GColour system indicator
HTape speed
IRecorder operation mode
JCassette mark
Basic Connections
ACheck contents
Make sure the package contains all of the accessories listed in
“Specifications”.
BSituate recorder
Place the recorder on a stable, horizontal surface.
CConnect recorder to TV

RF Connection

ADisconnect the TV aerial cable from the TV.
BConnect the TV aerial cable to the ANT. IN terminal on the
rear of the recorder.
CConnect the supplied RF cable between the RF OUT terminal
on the rear of the recorder and the TV’s aerial input terminal.

AV Connection

(improves picture quality during tape playback.)
If your TV is equipped with AV input connectors
AConnect the aerial, recorder and TV as shown in the
illustration.
BConnect an AV cable between the AUDIO/VIDEO OUT
connectors on the rear of the recorder and the AV input
connectors on the TV.
Even if you are using AV cables to connect your recorder to your
TV, you must also connect it using the RF cable. This will ensure
that you can record one show while watching another.
DConnect recorder to mains
Plug the mains power cord into a mains outlet.
Number keys
[^]
0+++ +
PR. 12 SP
23 : 59 NTSC 3.58
31. 12. 01
– 1 : 23 : 45
ABCHGEFDJI
RF cable
(supplied)
Back of recorder
Mains power cord
AV cable
(not supplied)
To AV input
connectors
TV aerial cable
Mains outlet
To aerial terminal
TV
– Buttons, Connectors and Indicators –