JVC LPT0666-001A specifications Basic Playback

Playback

Basic Playback

Turn on the TV and select the AV mode or video channel.

A Load a cassette

Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointing towards the recorder.

●Do not apply too much pressure when inserting.

●The recorder turns on, and the counter is reset, automatically.

●If the cassette’s record safety tab has been removed, playback begins automatically.

BStart playback

Press 4.

●If the tape reaches its end during playback, the recorder stops playback, rewinds the tape and ejects the cassette, then enters the standby mode automatically.

Reverse		Forward		Forward
		slow
search	Reverse play		Normal play	search
		motion*
2 steps				2 steps
		1 step
* HR-J585EU only

When the tape is not running

Rewind/fast-forward at high speed

Press 3 or 5.

●If you press and hold 3 or 5 during rewinding or fast- forwarding, you can see the picture on the screen. Releasing it cancels the picture search and resume rewinding and fast- forwarding.

Eject the cassette

Press . OR Press 0 on the recorder.

●You can also eject the cassette when the recorder is standby mode.

Turn off the recorder

Press 1 on the remote	OR Press 1on the recorder. The
control. The recorder turns	recorder enters in the
off.	standby mode.

			Playback Features
During playback
Stop playback			Adjusting tracking condition
Press 8 on the remote	OR Press 0 on the recorder.
			Automatic tracking adjustment
control.
			When a new cassette is loaded, the recorder enters the automatic
Pause playback and view still picture
			tracking mode.
Press 9.			Manual tracking adjustment
● The recorder enters Pause mode after moving 2 or 3 frames.			If automatic tracking cannot eliminate noises well during
● If there is vertical jitter, use the PR+/– to correct the picture.			playback, adjust the tracking manually.
● Press 4 to resume normal playback.			Press and hold PR + or – to eliminate the noises.
● Still picture playback stops automatically after about 5 minutes
to protect the heads.			Selecting Soundtrack (HR-J585EU only)
Pause and Frame-by-Frame playback
			Your recorder is capable of recording four soundtracks (STEREO,
(HR-J585EU only)
			LEFT, RIGHT and MONO) and plays back the one you select. Set
Press 9 to pause, then press 9 repeatedly.			“AUDIO” to the appropriate mode. ( 5)
● Press 4 to resume normal playback.			NOTE:
High-Speed Search			Set “OSD” to “ON” to display the indications on the screen.
Press 3 or 5.		( 5)
● Press 4 to resume normal playback.			Rewind Power Off
● High-speed search stops automatically after about 3 minutes to
protect the heads, then normal playback resumes.			When the tape is not running, press 3, then press 1. “REW”
Variable Speed Search (including slow-motion*)			blinks on the screen. The recorder enters the standby mode
Press w or e repeatedly.			automatically after rewinding the tape.
● Press 4 to resume normal playback.			Ez (Easy) Power Off
● Each time you press w or e, the playback speed changes. To
decrease the speed during picture search, press the opposite			During playback, press	. The recorder stops playback,
direction button repeatedly.
			rewinds the tape and ejects the cassette, then enters the standby
● If there is vertical jitter, use the PR+/– to correct the picture.
			mode automatically.
* HR-J585EU only
● During still picture, press e to start forward slow motion			Playing back selected scene repeatedly
playback. If you press 9, still picture resumes.
			— Ez (Easy) Repeat Playback
● Slow motion playback stops automatically after about 30
seconds to protect the heads, then still picture resumes.			During playback, press and hold	. The recorder starts the
			reverse search. Release this button at the point you want repeat
ATTENTION:
			playback to start. The recorder repeats the selected scene twice.
In the search, still, slow-motion or frame-by-frame playback			● During Ez repeat playback, “EZ REPEAT” appears on the screen.
mode,
● the picture will be distorted			Skipping unwanted portions
● the noise bars will appear
			— Skip Search
● there will be a loss of color with an LP-recorded tape (HR-
J585EU only)			Press 30 SEC once to 6 times during playback. Each press
			initiates a 30-second period of high-speed playback (up to
			3 minutes). When the specified portion of the tape is skipped,
			normal playback resumes automatically. To return to normal
			playback during Skip Search, press 4.
	— 10 —