JVC LPT0666-001A specifications Checking, canceling or changing programme settings

Intelligent LP Recording (HR-J585EU only)

When you set the tape speed to “IP”, the recorder automatically switches to LP mode to allow complete recording if there is not enough tape to record the entire programme while timer-recording in SP mode.

For example, recording a programme of 210 minutes in length onto a 180-minute tape.

Approximately 150 minutes	Approximately 60 minutes
SP mode	LP mode

Total 210 minutes

NOTES:

●If you have programmed the recorder to timer-record 2 or more programmes, do not use this function, but change the tape speed manually during timer programming.

●There may be some noise and sound disturbance where the tape speed switches from SP to LP mode on the tape.

●This function is not available during ITR (Instant Timer Recording), and will not work properly with any tapes longer than E-180 or with some tapes of shorter lengths.

Checking, canceling or changing programme settings

ADisengage timer recording standby mode

Press 1.
B Access Main Menu screen	REC

Press MENU. Press w e to select the icon “REC”, then press OK. The programme list appears.

CCancel or change programme setting

To cancel a programme, press rt to select the programme you want to delete, then press w. To change a programme, press rt to select the programme, then press OK. Press w e to select the item you want to change,

then press the number keys or rt to change the settings. After confirming all information is correct, press MENU.

DReturn to normal screen

Press MENU.

ERe-engage timer recording standby mode

Press 1. The recorder enters timer standby mode. The timer indicator and standby/record indicator light on the display panel.

— 13 —