JVC LPT0679-001B specifications Select the DV deck, Press DV, Find the programme start point

30 PLAYBACK/RECORDING ON DV DECK

Basic Playback

(DV deck)

Turn on the TV and select the AV mode.

A Load a cassette.

Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the recorder.

●Do not apply too much pressure when inserting.

●The recorder’s power comes on automatically.

●If the erase protection switch is set to “SAVE”, playback begins automatically. It takes about 15 seconds until the playback picture appears.

●Make sure the VCR indicator appears on the front display panel. If not, press TV/VCR on the remote control to turn on the VCR indicator.

			B Select the DV deck.
			Press DV.
1	3	2	● The DV button lights on the recorder.
			C Find the programme start point.

If the tape is advanced past the start point, press 3 or turn the JOG dial to the left. To go forward, press 5 or turn the JOG dial to the right.

1

2

1 2 3

4 5 6

7 8 9

0

1

2

3

4

4

3

D Start playback.

Press 4.

●The DV playback indicator lights on the recorder.

E Stop playback.

Press 8. Then press to remove the cassette.

●The DV playback indicator turns off.

Usable cassettes

Only cassettes marked can be used with the DV deck.

NOTE:

When you record a tape on the DV deck with the recording speed set to “LP”, it is recommended to play back that tape back on this DV deck. Digital video recorder from other manufacturers may not be able to play back the tape properly.