JVC LPT0679-001B Display the code, Change the remote control code, Set the remote control code

60 REMOTE CONTROL

Remote Control Functions

Remote A/B/C/D Code Switching

The remote control is capable of controlling four JVC video recorders independently. Each of recorders can respond to one of four codes (A, B, C or D). The remote control is preset to send A code signals because your video recorder is initially set to respond to A code signals. You can easily modify your video recorder to respond to B, C or D code signals.

On the remote control

A Display the code.

Press and hold VHS or DV on the remote control for over 2 seconds. The code currently set blinks on the LCD panel.

B Change the remote control code.

Press the number key “1” for A, “2” for B, “3” for C or “4” for D.

C Set the remote control code.

Press OK to set the code.

LCD panel

1

2
1	2	3

4	5	6	3
7	8	9	4
			4

0

1	3
2

1 3 2

On the recorder

D Display the code.

Press 4 on the recorder for over 5 seconds while the recorder is turned off. The code currently set appears on the front display panel.

●If the code displayed on the front display panel is different from the code set on the remote control, go to step 5.

E Change the recorder’s code.

Press 8 on the remote control. The code currently set on the remote control will be applied to the recorder.

NOTE:

When “POWER SAVE” is set to “ON” ( pg. 67), it is impossible to change the remote code.