JVC LPT0679-001B specifications Manual Channel Set

74 SUBSIDIARY SETTINGS (cont.)

1

2

1	2	3
4	5	6	3
7	8	9	4
			4

0

1	3
2

D Select the band.

Press rt to change the band between CH (regular) and CC (cable), then press e.

E Input the channel.

CH21

Manual Channel Set

Store channels that were not stored during Auto Set Up

( pg. 13), Preset Download ( pg. 14) or Auto Channel Set ( pg. 72).

A Access the Main Menu screen.

Press MENU.

B Access the Confirmation screen.

Press rt to move the highlight bar (pointer) to “MANUAL CH SET”, then press OK or e. The Confirmation screen appears.

C Select the channel position.

Press rt w e until an open (Example) To store in position 6.

position in which you want to store a channel begins blinking, then press OK. The Manual Channel Set screen appears.

The blueback screen and the programme currently being broadcast by the selected channel appear alternately for 8 seconds each.

Press the number keys to input the channel number you want to store.

●Input “0” before any single number entries.

●To input the registered station name (ID –  pg. 78), press e until “– – – –” (ID setting) begins blinking, then press rt.

●For fine tuning adjustment, press e until “+/–” begins blinking, then press rt. While tuning, “+” or “–” appears.

●When “L-2 SELECT” is set to “A/V” or “SAT”, the “DECODER” setting cannot be changed ( pg. 53).

F Enter new channel information.

Press OK and the Confirmation screen appears.

●Repeat steps 3 – 6 as necessary.

G Close the Confirmation screen.

Press MENU.

●To change positions, see “Change Station Channel Position” ( pg. 75).

●If you wish to set station names other than the ones registered in your recorder, see “Set Stations (B)” ( pg. 76).

ATTENTION

Guide Program numbers are not set when channels are stored manually. If an attempt is made at timer programming with the VIDEO Plus+ system in this state, the “GUIDE PROG SET” screen appears; set the Guide Program numbers on this screen. ( pg. 37, “ATTENTION — Guide Program Number Set”)

Or perform “Guide Program Number Set” ( pg. 82).