Installation

Although your TV will not lose its settings or stored channels when switched off, you may wish to re-install the programs because you have moved to a different area with different broadcast frequencies, you wish to reinstate a channel previously deleted from the channel list, or you want to watch new channels which have started broadcasting.

Display the DTV Menu and using the “” or “” buttons, highlight the Installation line and press OK to display the Installation Menu.

The Installation menu appears.

You can either select Factory Settings, effectively resetting the receiver to its factory setting condition, or just search for channels.

Automatic Search:

The receiver can search for channels automatically (searching all the broadcast frequencies for free-to-air channels).

To perform Automatic search, Select Automatic Search with the “” or “” buttons and press OK. A warning message is displayed.

6WDUW￿DXWRPDWLF￿VHDUFK"￿&XUUHQW￿35￿OLVW ZLOO￿EH￿UHSODFHG￿

<HV 1R

This starts the automatic tuning process and searches through all the available broadcast frequencies for free-to-air channels.

0(18

%$&.

Previous channels will be replaced on automatic search.

If no digital terrestrial television broadcasts are found, the TV will display a message:

1R￿SURJUDPPH￿IRXQG￿

3OHDVH￿FKHFN￿DQWHQQD￿VLJQDO￿

2.

When “OK” button is pressed, following message will appear on the right bottom side of the screen:

35￿/LVW￿(PSW\

Manual Search:

This is for searching for digital channels on a single broadcast frequency. The frequency channel number (21-68) is entered in the box at the top left of the screen and the received signal level and signal quality can be observed on the two bar graphs at the bottom. When OK is pressed, the TV searches that frequency and display a list of the channels found.

- 25 -