No-Signal and Out Of Range Detection (PC mode)

In PC Mode,as no menu is displayed,in case that there is no PC input to the TV, it is displayed an OSD message:

No input signal detected

then the power lamp turns to orange and PC will switch to PC standby mode. Press AV but-

ton, digit buttons or “” / “” buttons to exit standby mode.

In PC Mode, if the resolution and the vertical frequency is not supported by the concept, it is displayed an OSD message:

Signal out of range

AnalogueTeletext

Teletext is an information system that displays text on your TV screen. Using the Teletext information system you can view a page of information on a subject that is available in the list of contents (index).

On screen display is not available in text mode.

Contrast, brightness or colour control is not available, but volume control is available in text mode.

To operate Teletext

Select a TV station on which Teletext is being transmitted.

Press (TELETEXT) “” button. Usually the list of contents (index) is displayed on the screen.

To select a page of Teletext

Press the appropriate digit buttons for the required Teletext page number.

The selected page number is displayed at the top left corner of the screen. The Teletext page counter searches until the selected page number is located, so that the desired page is displayed on the screen.

Press “” button to move the Teletext screen forward one page at a time.Press “” button to move the Teletext screen backward one page at a time.

To Select Index Page

To select the page number of the index (gen- erally page 100), press “” button.

Searching for a teletext page while watching TV

In the Teletext mode pressing “” button will switch the screen to the TV mode. In the TV mode enter a page number using digit buttons. As you enter last digit of page num-

ber, “” sign will replace the page number and flash until the entered page number is found. Then the page number will replace “” sign again. Now you can display this teletext page pressing “” button.

To Select Double Height Text

Press “” button for the top half of the in- formation page to be displayed in double height text.

Press “” button again for the bottom half of the information page to be displayed in double height text.

Press “” button once more for the full page of normal height text.

To Reveal “concealed”

Information

Pressing “” button once will reveal an- swers on a quiz or games page.Pressing “” button again will conceal the revealed answers.

- 36 -