Setting Bright-2Using“” or “” button select Bright-2.Press “” button to increase the back light.Press “” button to decrease the back light.Setting Colour Temp.Using “ ” or “ ” button select Colour Temp.Press “” or “” button to select “Warm”, “Cool” or “Normal”.Setting Noise ReductionUsing “ ” or “” button select Noise Re- duction.

Press “” or “” button to select Noise Re- duction level “Off” or “Minimum” or “Me- dium” or “Maximum”.

Note 1:

At low signal level, the changings on the Noise Reduction function are not effective when there is menu on the screen. If the menu is removed, the effect of this function is seen. At normal broadcasting, Noise Reduction changings are effective at once.

Note 2:

At moving pictures, while Noise Reduction is at maximum level, some picture distortions may occur. If Noise Reduc-

tion is set to medium or minimum, the picture will improve.

Setting HueDuring Playback NTSC system, this will ap-

pear inAV mode only when NTSC video source is applied. Otherwise, HUE option is invisible in Picture menu in TV mode :

Using “” or “” button select Hue.Press “” button to increase hue level.

Press “” button to decrease hue level. Center value is indicated with one arrow. Reset

Press BLUE button to reset the picture modes to factory default settings.To Store the SettingsIn the Picture Menu, all settings are stored automatically.

Sound Menu

As you enter the main menu, sound will be the second item. In the main menu, select Sound using “” or “” button, then enter the sound

menu by pressing “” / “” or “OK” button. Setting VolumeAs you enter the sound menu, Volume will be the first selected option.Press “” button to increase volume.Press “” button to decrease volume.

Or you can directly change the volume settings using “ +” (to increase) or “- ” (to decrease) button.

Setting Bass LevelUsing “ ” or “ ” button select Bass Level.Press “” button to increase bass level.Press “” button to decrease bass level. Setting Treble LevelUsing “” or “” button select Treble

- 28 -