Decoder (EXT-2)You can use this mode to connect any decoder to your TV.Press the “” or “” buttons to set it “On” or “Off”.

When you select Decoder (EXT-2) “On”, EXT-2 output will be chosen as TV mode only and any scrambled channels will be unscrambled through decoder connected your TV via EXT-2 output.

Setting VCR ( Video Cassette Recorder ) Mode

This item can be seen in TV, EXT-1, EXT-2, EXT-2S, EXT-3, EXT-4 and EXT-4S modes.

If you want to watch a VCR source from one of these modes, then it will be better to set VCR mode “On”. For this, while the cursor is

on this item press the “” or “” buttons to set it “On”.

If you want to watch a DVD, then you must set this item “off”; because DVD is not a source like a VCR and to see the picture better, you must set the VCR mode “Off”.

To Store Settings

Press “” / “” or “OK” button on Store op- tion to store Install menu settings.

After stored, T-V LINK menu will appear. If you do not need to do T-V LINK, select Can-

cel and press “” or “OK” button to exit the menu.Program Menu

Press "MENU" button, now you are in main menu. In the main menu, select “Program” using “” or “” button. Then enter the

Programme menu by pressing “” / “” or “OK” button.Note: There is no Program menu in any EXT modes.

Program Menu is used to delete a channel, to change the programme number of a channel, to give a channel name to a channel, and to start the A.P.S (Autostore) function.

To choose a channel in the PROGRAM menu

Press “” / “” / “” / “” button. The programme number that you choose is highlighted in the Program.

Caution:

Using “Delete” or “Insert” function rewrite the current channel list in the Program menu. Therefore, the programme num-

bers of some of channels will change.

When you complete the settings of Program menu:If you have a T-V LINK compatible VCR, press

” button to display the T-V LINK menu. then follow the operating procedure “Downloading the data to VCR”.

If you do not have a T-V LINK compatible VCR,select Cancel and press “” or “OK” button to exit the menu.To give a channel name (Name):1.Choose the channel you want to give a chan- nel name.2.Press the RED button to enter the Name mode.3.Press “” or “” button to choose the position,and press “” or “” button to

- 31 -