Setting Hue

During Playback NTSC system, this will appear in AV mode only when NTSC video source is applied. Otherwise, Hue option is invisible in Picture menu in TV mode :

•Using “” or “” button select Hue.

•Press “” button to increase hue level.

•Press “” button to decrease hue level. Center value is indicated with one arrow. Reset

Press BLUE button to reset the picture modes to factory default settings.

To Store the Settings

In the Picture Menu, all settings are stored automatically.

Sound Menu

As you enter the main menu, sound will be the second item. In the main menu, select Sound using “” or “” button, then enter the sound

menu by pressing “” / “” or “OK” button.

Setting Volume

As you enter the sound menu, Volume will be the first selected option.

•Press “” button to increase volume.

•Press “” button to decrease volume.

Or you can directly change the volume settings using “ +” (to increase) or “- ” (to decrease) button.

Setting Bass Level

•Using “” or “” button select Bass Level.

•Press “” button to increase bass level.

•Press “” button to decrease bass level.

Setting Treble Level

•Using “” or “” button select Treble.

•Press “” button to increase treble level.

•Press “” button to decrease treble level. Setting Balance

It allows adjusting the distribution between the left and right speakers.

•Using “” or “” button select Balance.

•Press “” button to change balance right- ward.

•Press “” button to change balance leftward. Hyper Sound

•Using “” or “” button select Hyper Sound.

•Pressing “” or “” button will turn this fea- ture on or off.

Pseudo/spatial effect can be turned on or off via the Hyper Sound item in the Sound menu or by remote control. In Mono transmission the left and right channels will be added at left channel and dummy stereo effect will be introduced to end-user.

In stereo transmission it yields a phase difference between left and right channels. Hyper Sound selection will be displayed on the screen when the TV Status button is pressed or programme is changed.

Selecting Sound Mode

•Using ““ or “” button select Sound Mode.

•Press ““ or “” button to change Sound Mode.

You can choose Mono, Stereo or Dual (I-II) mode, only if the selected channel supports that Sound Mode.

You can also change sound mode directly pressing “I-II” button on your remote control.

In case of bilingual broadcast (Dual Sound), you can select original or dubbed language using Sound Mode option. So when somebody listens to the original language from the loudspeakers, somebody else can listen to the dubbed language from headphone.

ENGLISH - 16 -