TV and Video Recoder (VCR)

•Connect the Video Recorder to the ANT (an- tenna input) socket of the TV with the aerial cable.

•Connect the Video Recorder to the EXT-1 or EXT-2 terminal with the SCART cable, or con- nect it to the EXT-3terminal with the audio and video cables.

NTSC Playback

Connect a NTSC video recorder to a terminal. Then press “AV” button to select the corresponding AV mode.

NTSC 3.58/4.43 system is detected automatically in AV mode.

Camera and Camcorder

To connect to the EXT-3terminal

Connect your camera or camcorder at the back side of your TV.

•Connect your equipment to the TV via VIDEO (yellow), AUDIO R (red) and AUDIO L (white) inputs. You should connect the jacks to the input in the same colour.

Connect the decoder to the video recorder

Some video recorders have a special euro- connector for decoder.

•Connect an eurocable to the euroconnector of your decoder and to the special eurocon- nector of your video recorder. See also the handbook of your video recorder.

•To connect your video recorder to the TV, see TV and Video Recorder section.

If you want to connect more equipment to your TV, consult your dealer.

Connecting Headphones

Use the stereo headphone socket on the right side of your TV, to connect headphones.

Connecting the PC

Connect PC monitor with 15-pin PC cable to the 15-pin connector on the rear of the com- puter. For detailed installation procedure see Installation in PC mode.

To connect to S-Video input

Connect your camera or camcorder at the back side of your TV.

•Connect your equipment to the TV via S-Video input at the back side by using S-Video cables.

ENGLISH - 27 -