6RXUFH79
79
(;7
(;7
(;76
(;7
(;76
3&
Other Features
TV Status
Programme Number, Programme Name (or EXT), (they are displayed on the upper left of the screen). The sound indicator is displayed with them too. They are displayed after programme change for 3 seconds.
Sound Indicator
The alternatives of the indicator are Mono, Ste- reo, Dual I and Dual II. This indicator is displayed under the programme number indicator on the screen.
0RQR
In Mono broadcast or in
6WHUHR
In Stereo broadcast.
'XDO,
If dual broadcast detected. Dual I is selected in default and also can be selected after Dual II by Remote Control.
'XDO,,
If Dual II is selected by Remote Control.
Hyper Sound
By selecting Hyper Sound in sound menu or by pressing the “ 
” button on your remote
control, Pseudo/Spatial effect can be turned on or off. In Mono transmission the left and right channels will be added at left channel and dummy stereo effect will be introduced to
In stereo transmission it yields a phase difference between left and right channels. Hyper Sound selection will be displayed on the screen when the TV Status button is pressed or programme is changed.
Picture Mode
Picture mode OSD is displayed when BLUE button is pressed. Picture mode can be changed to standard, soft, and bright.
Sleep Timer
Sleep Timer mode OSD is displayed when YELLOW button is pressed.
The Sleep Timer is used to turn the TV off after a defined period of time after selecting this item. The timer can be programmed between Off and 120 minutes in steps of 10 minutes. (Off, 010, 020, 030, 040, ... , 120)
If sleep timer is activated, at the end of the selected time, the TV goes automatically to
Mute Indicator
It is placed in the upper middle of the screen when enabled, and it stays there until it is dis- abled.
To cancel mute, there are two alternatives; the
first one is by pressing the "
" button, this volume is set to the preceding value, and the second one is increasing or decreasing the volume level.
ENGLISH - 20 -