JVC LT-32A60SJ manual „ Pre-set download, „ Direct Rec, When Feature not Available is, Displayed

LT-26A60SJ / LCT1863-001A-U / English

LT-26A60SJ_Eng.book Page 11 Friday, April 15, 2005 1:49 PM

			Setting up your TV
„ Pre-set download		You cannot carry out Direct Rec using your
The VCR will automatically download the		TV’s control.
registered data on the TV channels from the		Generally, the VCR cannot record a TV
TV. This means you do not need to set up the		channel that it cannot receive properly on its
program channels on your VCR manually.		own tuner, even if you can view that TV
The preset download function automatically		channel on the TV. However, some VCRs
begins when the initial setting is complete or		can record a TV channel by using the TV’s
whenever you carry out the AUTO		output if that channel can be viewed on the
PROGRAM or EDIT/MANUAL functions.		TV. For details, see your VCR instruction
You can also carry out this function using		manual.
your VCR controls.		When the VCR is not ready, the following
When “FEATURE NOT AVAILABLE” is
		messages are displayed.
displayed:
If “FEATURE NOT AVAILABLE” is		ERROR	Cause and
displayed, the download was not performed		MESSAGE	countermeasure
correctly. Before trying to download again,
		NO	The VCR is not able to
check that:
		RECORDING	record.
• the VCR power is turned on
			Check the VCR.
•	the VCR is T-V LINK compatible
		NO	The TV input is set to EXT-4
•	the VCR is connected to the EXT-2
		RECORDING	or PC. Since the EXT-4
	terminal
		POSSIBLE	picture or PC picture cannot
• the SCART cable is fully wired.
			be output to EXT-2, DIRECT
„ Direct Rec			REC is not possible.
“What You See Is What You Record”		NO	The recording device is not
You can easily record to VCR the images		RECORDING,	ready to record. Check the
		MEDIA	VCR tape.
that you are watching on the TV.
		PROBLEM
For details, read the manual for your VCR.
		NO	The recording device cannot
Use your VCR controls. “DEVICE IS
RECORDING” is displayed.		RECORDING,	record as it is recording or
		DEVICE BUSY	playing. Check the VCR.
In the following situations, the VCR
		Refer to the VCR instruction manual.
will stop recording if the TV is turned

off, if the TV channel or input is changed, or if the menu is displayed on the TV:

•when recording images from an external device connected to the TV (for example a camcorder)

•when recording a TV channel after it has been unscrambled on a decoder

•when recording a TV channel by using the TV’s output because the VCR’s own tuner cannot properly receive that channel.

11