JVC LT-32A60SJ, LT-26A60SJ manual EXT Setting, „ S-IN S-VIDEO input, ID List, Dubbing

LT-26A60SJ / LCT1863-001A-U / English

LT-26A60SJ_Eng.book Page 37 Friday, April 15, 2005 1:49 PM

SET UP menu

6Turn on the VCR, and then press the a button to transmit the data to VCR

The T-V LINK menu disappears once the data transmission ends.

EXT SETTING

1Choose EXT SETTING, then press the a or 3 button

The EXT SETTING menu appears.

If the DECODER (EXT-2) function has been set to “ON” but the TV channel cannot be unscrambled, check the following:

•Has the decoder been connected to the VCR properly according to the VCR and decoder instruction manuals?

•Has the decoder power been turned on?

•Can the TV channel be unscrambled with a decoder?

•Do you need to change the VCR settings in order to connect the decoder? Confirm that the VCR is set properly by rechecking the VCR instruction manual.

> EXT SETTING

EXT-1	DUBBING
	EXT-2
EXT-3
TV

OK

S-IN

D0020-EN

2Follow the instructions for the function you want to use and operate the function

S-IN:

You can enjoy the high-quality picture of the S-VIDEO signal (Y/C signal).

ID LIST:

You can have a name for each of the devices connected for each EXT terminal.

DUBBING:

You can choose a signal source to be output from an EXT-2 terminal.

„S-IN (S-VIDEO input)

You can connect a device (such as an S-VHS VCR) to enjoy the high-quality picture of the S-VIDEO signal (Y/C signal).

Preparation:

•First read the device’s instruction manual and “Additional preparation” on page 41 to connect the device to the TV properly. Second, follow the device’s instruction manual to set the device so that it sends an S-VIDEO signal (Y/C signal) to the TV.

•Do not set S-IN (S-VIDEO input) to an EXT terminal connected to a device which cannot output an S-VIDEO (Y/C signal).

37