JVC LT-26A60SJ, LT-32A60SJ manual Language, Decoder EXT-2

LT-26A60SJ / LCT1863-001A-U / English

LT-26A60SJ_Eng.book Page 36 Friday, April 15, 2005 1:49 PM

SET UP menu

4Press the green or red button to search for a TV channel

Scanning stops when the TV finds a TV channel. Then the TV channel is displayed.

5Press the green or red button repeatedly until the TV channel you want appears

If the TV channel reception is poor:

Press the blue or yellow button to fine- tune the TV channel.

6Press the a button and register the TV channel to a Programme number (PR)

The normal EDIT menu is resumed.

LANGUAGE

The LANGUAGE setting which was performed in the “Initial settings” (page 7) can be changed.

DECODER (EXT-2)

If you have a decoder connected to a T-V LINK compatible VCR, which in turn is connected to the EXT-2 terminal, use the DECODER (EXT-2) function to unscramble the scrambled TV channels.

1Turn on the decoder power

2Display the scrambled TV channel on the TV

Even if the decoder is working, a scrambled picture appears.

3Display the SET UP menu and choose DECODER (EXT-2)

SET UP

AUTO PROGRAM
EDIT/MANUAL
LANGUAGE
DECODER(EXT-2)	OFF
EXT SETTING

1Choose LANGUAGE, then press the a or 3 button

A sub-menu of the LANGUAGE function appears.

> LANGUAGE

OK

D0002-EN

2Press the 5 and 6 buttons to choose a language. Then press the a button

OK

D0029-EN

4Press the 5 buttons to choose

ON

An unscrambled picture appears.

To cancel the DECODER (EXT-2) function:

Press the 5buttons to choose OFF.

5Press the a button to complete the setting

The T-V LINK menu appears.

T-V LINK

DOWNLOAD TV RECORDING DEVICE

EXIT

OK

D0005-EN

You can send the programme numbers data to a VCR with the T-V LINK function.

36