OPTIONAL SETTING

5Main Menu

This section describes the overview of the main menu displayed when you press [SETUP]. For more details, see the reference page for each item. The main menu consists of the function setting items below.

5Auto Channel Scan

If you switch wires (e.g., between antenna and CATV) or if you move the unit to a different area after the initial setup, or if you restore the DTV channel you deleted, you will need to perform auto channel scan.

Press [SETUP].

EXIT

To exit settings.

PICTURE

You can adjust the picture quality.

(Refer to “Picture Adjustment” on page 22.)

SOUND

You can adjust the sound quality.

(Refer to “Sound Adjustment” on page 23.)

CHANNEL

•You can automatically scan the viewable channels. (Refer to “Auto Channel Scan” on page 18.)

•You can skip the undesired channels when selecting

the channels using [CHANNEL /]. (Refer to “Channel List” on page 19.)

•You can add the channels that were not scanned by the auto channel scan.

(Refer to “Manual Register” on page 20.)

DETAIL

•You can change the display format for closed caption, which displays the dialogue of a TV program or other information across the TV screen.

(Refer to “Closed Caption” on page 24.)

•You can set the viewing limitations. (Refer to “V-chip” on page 28.)

•You can adjust the position, stability and clarity of the PC screen.

(Refer to “PC Settings” on page 31.)

•You can select the sound input for the HDMI1 input jack if your unit is connected to an HDMI or DVI device.

(Refer to “HDMI Audio” on page 32.)

•You can select the energy saving mode. (Refer to “Energy Saving Mode” on page 32.)

LANGUAGE

You can change the language (English, Spanish, French) displayed on the main menu.

(Refer to “Language Selection” on page 21.)

18

Before you begin:

Make sure if the unit is connected to antenna or cables.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “CHANNEL” , then press [ENTER].

3Use [Cursor K/L] to select “Autoscan”, then press [ENTER].

Channell

Autoscan

Channel List

Manual Register

Antenna

Use [Cursor K/L] to select an appropriate option, then press [ENTER].

Autoscan

Autoscan will rescan all channels.

Back

This may take a while to complete.

Air

 

 

Select the destination of "ANT.IN" jack.

Cable

 

 

Air

 

Cable

 

1 hour

 

 

Cable

Or

 

 

ANT.IN

 

•When aerial antenna is connected, select “Air”.

•When connected to CATV (analog) signals, select “Cable”.

•When connected to CATV (digital) signals, select “Cable 1 hour”. “Cable 1 hour” may take an hour to memorize all digital channels.

•Scanning and memorizing of channels start automatically.

Now the system is scanning for channels, please wait.

72%

 

Analog channels

 

10ch

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital channels

 

6ch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SETUP

Exit

 

 

 

 

 

 

 

 

•When the scanning and memorizing are completed, the lowest memorized channel will be displayed.

EN