Troubleshooting (continued)
Problem
Actionspage
Problem
Actionspage
Wrong screen size (480p (525p) only)
No picture, no sound
HDMI |
|
| No sound |
| Green and distorted |
Functions | screen |
Some functions do not | |
| work |
| “FEATURE NOT |
| AVAILABLE” |
Error | “NO RECORDING” |
message | “NO RECORDING |
| POSSIBLE” |
| “NO RECORDING |
| MEDIA PROBLEM” |
| “NO RECORDING |
| DEVICE BUSY” |
Switch “SIZE” in “HDMI SETTING” to “1”, “2” or “AUTO”.
(“SIZE” will not appear when signals are other than 480p | 34 | |
(525p)) |
| |
Use the cable marked with HDMI logo. | – | |
Check if the device is compliant with HDMI. | – | |
Switch “AUDIO” in “HDMI SETTING” to “DIGITAL” or “AUTO” | 34 | |
for HDMI devices, or “ANALOGUE” or “AUTO” for DVI devices. |
| |
(Not available for |
| |
Wait a little for the signal to stabilize when switching the | – | |
signal format for an “HDMI” device. | ||
| ||
It is not a malfunction. Some functions in the menu do not | – | |
display depending on the situation. | ||
| ||
Is the | 54 | |
Is the SCART CABLE “Fully Wired”? | 54 | |
Is the | – | |
After confirming all the conditions above, |
| |
press “OK” button again. |
| |
A problem occurs at the recorder. | – | |
The displayed video cannot be recorded. | – | |
The recorder is not ready for recording. | – | |
Check the videotape or DVD disc. | ||
| ||
The recorder is recording another programme, or is playing. | – |
Screen
DTV
Black or white dots appear on the screen
No picture, no sound
“Dolby Digital selected! No analogue audio available”
Forgot my PIN code!
Locked channels can be watched without inputting PIN code
When JVC or the broadcasting station informs you of the software
“Services have changed. Do you want to Update PR list?” is diplayed
TV/RADIO button do not work
LCD panels use fine dots (“pixels”) to display images. While more than 99.99% of these pixels function properly, a very small number of pixels may not light, or may light all the time.
Please understand that this is not a malfunction.
Some digital channels cannot be watched on this TV.
When “Dolby Digital” is selected in “Digital Audio Output”, the sound of a programme containing “Dolby Digital” signals cannot be output from the TV or the audio system connected to the “AUDIO OUT” terminal.
When the channel is changed, a message will be displayed for a few seconds.
To listen with the TV or audio system
Select a language without “(Dolby)” from “Audio Selection”
Switch “Digital Audio Output” to “PCM”
The default PIN code is “0000”. If you forget the numbers that you used to change the default PIN code, first input “0081” in the “Enter PIN code” and then register a new PIN code.
Once the PIN code is input, the lock function is released. If you want to use the lock function again, turn the TV off and then turn it on again.
Upgrade the tuner software by using the “Receiver Upgrade” function.
Update the PR list (digital channels) “Updating the PR list”
Set the “Favourite Mode” to “Off” (P. 39) and register both Radio and TV channels in “Favourites” (P. 45).
Then set “Favourite Mode” to “On”.
–
55 | IMPORTANT! |
| |
56 |
|
29 | PREPARE |
41 |
|
39 |
|
| USE |
– |
|
41 | SETTINGS |
| |
57 |
|
39 | TROUBLE? |
45 | |
|
51 | 52 |