JVC LVT0900-003A Assigning Titles to an MD, For the group title, For the disc and track title

Assigning Titles to an MD

You can assign a name to each MD, to each group and to each track using alphabetic characters (uppercase and lowercase), symbols and numerals. Once a title is assigned, it is displayed for your confirmation.

•You cannot edit titles composed of more than 64 characters.

About the number of characters entered for an MD

The total number of characters that you can enter for an MD is 1792. The maximum number that you can enter for a disc title is 64, and for each track title, 61. (However, the actual number you can enter may be slightly less than these maximum numbers due to the MD limitations—see page 68.)

•A space can be counted as one character.

•When the stereo long-hour recording (LP2 or LP4, see page 38) method is used for recording, the maximum number you can enter for a track title is automatically reduced since “LP:” and a space are automatically added to the beginning of the track title. Consequently this reduces the total number of characters you can enter for an MD.

Ex.: You can enter up to 10 characters for each track if an MD is composed of 120 tracks recorded using the stereo long-hour recording method.

In the following example, the process is explained from the very first—that is, inserting a disc. If you have already started recording or playing, start from step 2.

•You can edit titles during playback (in Normal play mode).

•To exit from the title entry screen any time during the process, press TITLE/EDIT or GROUP TITLE/EDIT repeatedly.

1 Insert an MD you want to edit into the MD loading slot.

2 Enter the unit into the title entry mode. For the disc and track title:

Press TITLE/EDIT.

Disc title entry screen appears in the main display.

For the group title:

Press GROUP TITLE/EDIT.

Group title entry screen appears in the main display.

3 Pressorto change the title entry mode.

•Each time you press the button, the title entry mode changes as follows:

For the disc and track title:

DISC TITLE? 1 TITLE? 2 TITLE?

The last			3 TITLE?
track title
For the group title:
GR– – TITLE?	GR1 TITLE?
The last		GR2 TITLE?
group title

4 Press SET to enter the unit into the selected title entry mode.

Character entry position

Character set

Ex.: When the disc has no title.

5 Enter characters.

1)Press DISP/CHARA to select the character set you want.

•Each time you press the button, the character set changes as follows:

Capital letters &	Small letters &
Symbols	Symbols

Numerals

2)Press the character entry button for a character you want to input.

Ex.:

•To enter an “A” or “a,” press ABC once. To enter a “B” or “b,” press ABC twice.

To enter a “C” or “c,” press ABC three times.

•To enter a symbol, press MARK repeatedly until the mark you want appears.

•To enter a numeral, press 0 – 9.

•To enter a space while entering a title, press twice.

•To move the character entry position while

entering a title, press or *.

•If you have entered an incorrect character, press

or to select the character you want to correct, then press CANCEL to delete it.

*If you press repeatedly during recording, the entered characters may be displayed incorrectly. In this case, press TITLE/EDIT or GROUP TITLE/EDIT, then repeat from step 2 again.

– 59 –