JVC LVT1344-003A manual Getting Started, Unpacking, Connecting Antennas, 2Extend the FM antenna

Getting Started

Do not connect the AC power cord until all other connections have been made.

Continued

Unpacking

After unpacking, check to be sure that you have all the following items.

The number in the parentheses indicates the quantity of each piece supplied.

•FM antenna (1)

•AM loop antenna (1)

•Remote control (1)

•Batteries (2)

If any is missing, consult your dealer immediately.

Putting the Batteries into the Remote Control

Insert the batteries—R6P(SUM-3)/AA(15F)—into the remote control, by matching the polarity (+ and –) on the batteries with the + and – markings on the battery compartment. When the remote control can no longer operate the unit, replace both batteries at the same time.

1

2

R6P(SUM-3)/AA(15F)

3

•DO NOT use an old battery together with a new one.

•DO NOT use different types of batteries together.

•DO NOT expose batteries to heat or flame.

•DO NOT leave the batteries in the battery compartment when you are not going to use the remote control for an extended period of time. Otherwise, the remote control will be damaged from battery leakage.

Connecting Antennas

FM antenna

ANTENNA
EXT	FM antenna (supplied)

	AM
AM	GND
LOOP
	FM	coaxial)
		(75

1Attach the FM antenna to the FM [75 Ω] coaxial terminal.

2Extend the FM antenna.

3Fasten it up in the position which gives you the best reception, then fix it on the wall, etc.

About the supplied FM antenna

The FM antenna supplied with this unit can be used as temporary measure. If reception is poor, you can connect an outdoor FM antenna (not supplied).

To connect an outdoor FM antenna

Before connecting it, disconnect the supplied FM antenna.

	Outdoor FM antenna
	(not supplied)
	ANTENNA
	EXT
	AM
AM	GND
LOOP
	FM	coaxial)
		(75
A 75 Ω antenna with coaxial type connector should be
used.
		6