Continued
Connecting Other Equipment
You can connect audio
• DO NOT connect any equipment while the power 
is on.
•DO NOT plug in any equipment until all connections are complete.
NOW you are ready to plug in the unit and other connected equipment.
Canceling the Display Demonstration
When connecting the AC power cord into a wall outlet, the unit automatically starts the display demonstration.
To connect audio equipment
Stereo mini plug cord (not supplied)
Audio equipment
To audio output
For playing the other equipment through this unit,
connect between the audio output jack on the other equipment and AUX jack on the front of the unit by using a stereo mini plug cord (not supplied).
If the audio output on the other equipment is not stereo mini plug type
Use a plug adapter to convert the stereo mini plug to the corresponding plug of the audio output.
On the unit ONLY:
To cancel the display demonstration, press DEMO while the display demonstration is shown on the display.
When you press other buttons
The display demonstration stops temporarily. It will start automatically again (if no operation is done for 2 minutes) until you cancel it.
To start the display demonstration manually
Press and hold DEMO again for more than 2 seconds.
Saving the Power Consumption while on Standby—ECO mode
You can save the power consumption while the unit is turned off (on standby).
On the unit ONLY:
To activate the ECO mode, press ECO while the unit is turned off (on standby).
“ECO MODE” appears on the display illumination (including the display demonstration) disappears.
To deactivate the ECO mode, press ECO again.
The display illumination appears.
About ECO mode
While ECO mode is activated, the display demonstration is canceled temporarily.
8
