JVC SP-MXKC2, LVT1346-006A Setting the REC Recording Timer, Turning the Daily Timer On and Off

Using the Timers

Preparation for each music source:

Perform the following operation according to the music source you have selected. Then, the System enters Volume Setting mode.

When selecting TUNER FM or TUNER AM:

Press the ¢ or 4 button to select the preset station number, then press the SET/DISPLAY button.

When selecting CD :

Press the ¢ or 4 button to select the disc number, then press the SET/DISPLAY button.

Each time you press the button the disc number changes as fol- lows:

DISC 1 =DISC 2 = DISC 3 = (back to the beginning)

When selecting TAPE:

Insert a cassette tape you want to play into Deck A.

When selecting AUX:

Prepare the external equipment so that it will turn on at the ON time set by the System.

To allow this, the equipment should have the timer function.

Turning the Daily Timer On and Off

Once you have set the Daily Timer, it is stored in memory. So, the Daily Timer will be activated at the same time every day until it is canceled.

To cancel the Daily Timer temporarily:

1 Press the CLOCK TIMER button on the Unit repeatedly until the “DAILY” appears on the display.

The “DAILY” indicator blinks on the dispaly.

2 Press the CANCEL/DEMO button on the Unit.

“OFF” appears and both the Timer indicator ( ) and the “DAILY” indicator go out.

To activate the cancelled Daily Timer:

1 Press the CLOCK TIMER button on the Unit

English

5 Setting the volume level.

Press the ¢or 4button to select the volume level.

MIN, 1-26, or MAX: When the timer is turned on, the Volume will be automatically faded into the selected volume level.

❏When the volume level is set to MIN, no sound comes out of the speakers.

6 Press the SET/DISPLAY button.

The timer setting is completed, the display returns to the dis- play before you set the Timer.

repeatedly until the “DAILY” appears on the display.

The “DAILY” indicator blinks and the Timer indicator ( ) lights up on the dispaly.

2 Press the SET/DISPLAY button on the Unit.

“ON” appears on the display. The Timer indicator ( ) and the “DAILY” indicator remain lit, and the display returns to the original display.

•If the System is unplugged, or a power failure occurs, the timer setting will be lost in a few days. You will need to reset the clock first, then the timer.

7 Press the STANDBY/ON button to turn off the System if neccessary.

The Timer indicator ( ) and “DAILY” indicator are lit on the display, showing that the Daily Timer is set to on.

To confirm / change the timer setting, repeat the setting pro- cedure from the beginning.

When the timer ON-time comes:

The following operation will be automatically repeated every day.

•When the timer ON-time comes, and the System automatically turns on. The music source you have set is played. The Timer indicator ( ) blinks during timer operation.

•When the timer OFF-time comes, the System automatically

turns off. Then, the Timer indicator ( ) and “DAILY” indica- tor remain lit on the display.

•If the System is already on when the timer ON-time comes, the Daily Timer does not work.

Setting the REC (Recording) Timer

With the Recording Timer, you can make a tape of a radio broad- cast automatically whether or not you are home.

•You can set the REC Timer whether the System is on or off.

•Perform each setting within approx. 8 seconds. Other- wise, setting will be cleared and the procedure must be repeated from the beginning.

•If you have made a mistake while setting the timer, press the CANCEL/DEMO button on the Unit. However, this does not always cancel the current setting. If the CAN- CEL/DEMO button does not work, press the CLOCK TIM- ER button on the Unit repeatedly until the display returns to the original display, and start from the first step.

22